GB
7 - BAR FEEDER MAINTENANCE MASTER 880MP E-volution
7 - Pag. 2 / 7
7.1 MAINTENANCE - GENERAL RULES
DANGER - WARNING:
carry out machine maintenance and cleaning while the machine is off.
Regular cleaning and maintenance are critical to ensure smooth operation and longer machine
service life.
It is recommended to regularly and effectively clean the machine, its accessories and work
area, which also increases operator's safety.
Do not use petrol or solvents which would damage the painted and transparent parts, the cable
sheaths etc.
INFORMATION:
oxidation can damage metal parts and electric equipment.
To protect the bar feeder during long periods of inactivity, disconnect it from the mains, let the
compressed air out and cover with a piece of adequate cloth.
Any protection used should not be fully closed or sealed at the base; it should have ventilation
holes to make sure that air within the envelope cannot condense due to lack of circulation.
To Next Page
Loading...
