EN
4 - MOVEMENT AND INSTALLATION VIP80E-II
4 - Pag. 2 / 22
4.1 PRELIMINARY NOTE ON MOVEMENT AND INSTALLATION
INFORMATION:
move and install the machine by respecting the information provided by the
manufacturer, which is directly written on the package, the machine and in the
operation instructions. The person who is authorized to carry out these
operations shall prepare, if necessary, a "safety plan" to safeguard those who
are directly involved in them.
4.2 PACKAGING AND UNPACKAGING
ABC
8070_04_01_1
A WITHOUT PACKAGING
B PACKAGING ON PALLET
C PACKAGING IN CRATE
By reducing its dimensions, the packaging is made according to the type of transport required.
In order to make the transport easier, the shipping can be made with some disassembled
components being adequately protected and packaged.
Some parts, especially the electrical ones, are protected by anti-moisture nylon.
On the packaging all necessary information for loading and unloading is provided.
While unpacking, check the integrity and exact quantity of components.
The packaging material must be adequately disposed of in observance of the laws in force.
To Next Page