IEMCA VIP80E-II - Loading Axis Adjustment

5 - ADJUSTMENTS AND SETUP VIP80E-II
EN
5 - Pag. 7 / 8
5.6 LOADING AXIS ADJUSTMENT
The adjustment of the loading axis takes place automatically according to the diameter of the
bar to be machined set from the push-button panel.
This adjustment includes:
- modification of parameter 16 "BAR TYPE";
- modification of parameter 8 "BAR SIZE".
INFORMATION:
For further information on the modification methods of parameters, refer to the
"Instruction manual" which you can find attached.
INFORMATION:
In order to machine hexagonal bars modify the inclination of the magazine (see
par. 5.3 "Magazine adjustment (Hexagonal bars)").