IFM Electronic AL1102 - Safety Symbols on the Device; Tampering with the Unit

10
ifm Operating Instructions IO-Link Master with Profinet interface StandardLine 8 Ports IP 65 / IP 67 (AL1102) 2017-05-31
Safety instructions
>
2.4 Safety symbols on the device
15021
General warning
When this symbol is shown, consult the corresponding section in the operating instructions.
>
2.5 Tampering with the unit
11242
WARNING
Tampering with the units can affect the safety of operators and machinery!
Tampering with the units is not allowed.
In case of non-compliance our liability and warranty expire.
► Do not open the devices!
► Do not insert any objects into the devices!
► Prevent metal foreign bodies from penetrating!