IFM Electronic AL1102 - Profinet: Configure IO-Link Devices; Profinet: Programmers Notes

50
ifm Operating Instructions IO-Link Master with Profinet interface StandardLine 8 Ports IP 65 / IP 67 (AL1102) 2017-05-31
Configuration
>
8.5 Profinet: Configure IO-Link devices
18428
The AL1102 supports the configuration of the connected IO-Link devices out of the Profinet projection
software. The configurable parameters depend on the corresponding IO-Link device.
Information about the usable functions: → Profinet: Programmers' notes (→ p. 50)
Available parameters of the IO-Link devices: → Operating instructions of the IO-Link device
>
8.6 Profinet: Programmers' notes
12761
The programmer can access on the following data from the PLC application:
 Read device information of the AL1102
 Read diagnostics and alarms
 Set parameters of the connected IO-Link devices
The following sections show the available options.
Further information about the functional/operational blocks: → Help function of the Profinet
projection software