IFM Electronic AL1102 - Reset IO-Link Master to Factory Settings

40
ifm Operating Instructions IO-Link Master with Profinet interface StandardLine 8 Ports IP 65 / IP 67 (AL1102) 2017-05-31
Configuration
>
8.2.7 Reset IO-Link master to factory settings
12740
When resetting the AL1102, all parameters are reset to the → Factory settings (→ p. 62)
To reset the device to factory settings:
► Select [Setup] menu.
> The page shows the current settings.
► Click on [Factory Reset] to reset the AL1102.
> LR DEVICE sets the AL1102 factory settings.