IKA IC control - Fluid Information; IKA Fluid Specifications

10
• Fluid (Standard information for IKA fluid):
IKA Designation
Operating temperature
range for open bath
application
(°C)
Operating temperature
range for closed bath
applications
(°C)
Safety temperature
(°C)
Flash point
(°C)
CF�EG28�N10�80�8 -10 ��� 80 -10 … 80 90 115
CF�EG39�N20�80�16 -20 … 80 -20 … 80 90 115
CF�EG44�N25�80�19 -25 … 80 -25 … 80 90 115
CF�EG48�N30�80�22 -30 … 80 -30 … 80 90 115
UF�Si�N30�150�10LV -30 … 130 -30 … 150
145 
>170
HF�Si�20�200�50 20 … 200 20 … 200 255 >280
HF�Si�20�250�50A 20 … 200 20 … 250 255 >280
H
2
O (Water) 
5 … 95 5 … 95 - -
Customized 1 
Customized 2 
Check the suitability of the fluid according to your application�
Nomenclature for IKA fluid:
CF�EG28�N10�80�8 --
(1) Classification:
HF: Heating Fluid
CF: Cooling Fluid
UF: Universal Fluid
(2) Chemical composition:
Si: Silicone oil
EG: Ethylene Glycol
(3) Temperature range: (
Minimum temperature� Maximum temperature)
N: Negative Temperature
(4) Viscosiy:
Viscosiy at 25 °C for Heating Fluid (HF)
Viscosity at -20 °C for Cooling Fluid (CF)
Viscosity at 25 °C for Universal Fluid (UF)
Dynamic viscosity [mPa�s] is a product of kinematic viscosity [mm²/s] and density [kg/m³] of the fluid divided by 1000�
(5) Additional information:
A: Oil Additives
LV: Low Viscosity
 Note: for open bath application!
 Note: Tap water may be unsuitable for operation because the calcium carbonate content may cause calcification�
High purity water (from icon exchangers) and distilled or bi-distilled water are unsuitable for operation due to corrosive
properties of these media� High purity water and distillates are suitable as a medium after adding 0�1 g soda (Na
2
CO
3
,
sodium carbonate) per liter of water�
 Note: The temperature limit values are adjustable in accordance with the fluid used�
(5) Addition information
(4) Viscosity (8 mm²/s )
(3) Temperature range (-10 – 80 °C)
(2) Chemical composition (Ethylene Glycol 28%)
(1) Classification (Cooling fluid)