26
Maintenance and cleaning
The device is maintenance-free� It is only subject to the
natural wear and tear of components and their statistical
failure rate�
Cleaning:
Disconnect main plug prior to
cleaning!
Use only cleaning agents which have been approved by
IKA to clean IKA devices: Water containing tenside/ iso-
propyl alcohol�
- Wear protective gloves while cleaning the device�
- Electrical devices may not be placed in the cleansing
agent for the purpose of cleaning�
- Do not allow moisture to get into the device when
cleaning�
- Before using another than the recommended method
for cleaning or decontamination, the user must ascertain
with IKA that this method does not damage the device�
Spare parts order:
When ordering spare parts, please give:
- Machine type
-
-
Serial number, see type plate
- Software version�
Repair:
Please send instrument for repair only after it has
been cleaned and is fr
ee from any materials which
may constitute a health hazard.
Return the instrument in its original packaging�
Storage packaging is not sufficient� Please also use
suitable trans-port packaging�
To Next Page
Loading...
