SWIFT K11-EN, Rev.A 3
6. MENU 30
6.1 SPLICE 37
6.2 HEATER 44
6.3 SPLICE RESULT 48
6.4 OPTION 49
6.5 CALIBRATION 54
6.6 ELECTRODE 59
6.7 SETTING 63
6.8 INFORMATION 67
7. ERROR MESSAGE 70
7.1 OPTICAL FIBER IS TOO DIRTY. 70
7.2 REPLACE THE OPTICAL FIBER. 70
7.3 OPTICAL FIBER IS TOO LONG. 71
7.4 ERROR ON ANGLE OF OPTICAL FIBER 71
7.5 LOSS IS BIG. 72
7.6 OPTICAL FIBER IS THIN. 72
7.7 OPTICAL FIBER IS THICK. 72
7.8 BUBBLE BEING GENERATED 72
7.9 ERROR ON CUT SURFACE ON LEFT, RIGHT OR BOTH 72
8. SEALING PROBLEM SOLVING 73
8.1 WHEN LOSS IS BIG 73
8.2 ABNORMAL SEALING OPERATION 74
9. PROBLEM OCCURRENCE AND QUESTION 75
9.1 POWER 75
9.2 SPLICE 76
9.3 SLEEVE HEATER 77
9.4 OTHERS 78
To Next Page
Loading...
