SWIFT K11-EN, Rev.A 45
For the SOC, operators must use ILSINTECH standard products. Other company’s sleeve tubes
may not shrink properly.
Each heater mode heats up at different section of the heater.
6.2.1 Deletion
First, select a heater mode by touch. And then press “DEL” icon and the selected mode is deleted.
General modes no. 1~16 cannot be deleted.
6.2.2 Replacement
Select a heater mode to replace by touch and press it, and heater modes saved on the database
are displayed on the screen. Select a heater mode to replace and touch “REPLACE”, and the mode
is replaced with the new mode.
General modes no. 1~16 cannot be replaced.
To Next Page
Loading...
