/ /
Page 36 Manual
C.2.1.2 Mirror
Picture 16: Mirror selector
Touch a button to select the mirror axis.
Using this setting can be helpful if scanning transparencies from the back.
C.2.1.3 Splitting Image
Picture 17: Splitting Image parameters
The Splitting Image function splits the scanned image symmetrically in two parts.
Left The left part of the split image will be displayed.
Right The right part of the split image will be displayed.
Auto Both parts of the split image will be displayed successively as separate
images.
Off Disables the splitting function.
C.2.1.4 Start Splitting
Picture 18: Defines the splitting function start page
Defines the start page if Splitting Image is set to Auto.
Left Sets the left part of the split image as start page.
Right Sets the right part of the split image as start page.
To Next Page
Loading...
Need help?
General
