/ /
Page 48 Manual
C.2.5.2 USB
Transfers the scanned images to a USB storage device connected with the scanner.
If there is no USB storage device connected, you will see an error message otherwise the
file name and the directory will be displayed.
Picture 36: Error message if USB device is missing
If you want to change the file name, touch the line with the file name entry.
Modify the entry as described in chapter C.2.5.1.
If you want to save your image to a subdirectory on the USB storage device, click the icon
beside Directory. The directories will be listed.
Select the directory. Touch OK to confirm or touch Cancel to return without changes.
Touch here to close the window and to return to the main screen
(Picture 13).
Touch here to send the file to the selected transfer target.