/ /
Manual Page 5
About this Manual
Operation Manual
The Operation Manual gives all information about the normal operation and behavior of
the device. It is written for people who only operate the device and do not perform setup
and adjustment procedures. All device elements and software functions are described in
detail, although some of them might never be used. This manual does not cover any
application software. Refer to the appropriate application software manual to learn about
the application software.
All available manuals for this device can be downloaded from our customer service portal
at http://portal.imageaccess.de
. Be sure to always check for the latest versions of these
manuals.
This manual is divided into sections.
Section A contains the safety notes and the safety precautions. These safety
precautions must be followed carefully to avoid injury to the user while
working with the scanner.
Section B describes the scanner hardware and the first steps to take after the device
has been delivered. It contains also some maintenance information.
Section C describes touchscreen operation and the functions of the applications.
Section D gives a short introduction and basic information about the user interface
ScanWizard Web. All details about the interface can be found in the
integrated “Help” texts in the scanner.
Section E informs about the setup levels in general and describes the access level
User in detail.
Section F describes test and troubleshooting procedures.
Section G contains all technical data of the scanner and the manufacturer
declarations concerning safety and electromagnetic compatibility (EMC).
To Next Page
Loading...
Need help?
General
