Immergas CAR V2 Wireless - 11. SPECIAL FUNCTIONS; Language Selection; Regulation Parameter Management

30
11. SPECIAL FUNCTIONS
By pressing the button, a list of options is accessed
that allows to customise functioning of the CAR
V2
remote
control, according to the specic necessities.
To scroll the list, press the + / - buttons and press the
button to select the desired function.
11.1 LANGUAGE (language selection).
Allows to set the functioning language of the CAR
V2
remote
control. It is possible to select from Italian (ITA as per
standard) and English (ENG).
11.2 REGOLAZ (Management of regulation parameter).
Allows to customise the functioning parameters of the
CAR
V2
remote control.
- MINRIS (central heating ow minimum temperature),
allows to regulate the central heating ow minimum
temperature value. Moreover, this value is used to
calculate the curves used for the external probe. Values
that are too high can cause ow temperatures that are too
high on average for room central heating.
- OFFSET (regulation constant), constant that can be
regulated from -15°C to +15°C and in the presence
of the external probe (optional), modies the set ow
temperature (see Fig. 11-1) set to 0°C as per standard.
TM-MAX/MIN = Selected ow temp. range.
Te = External temperature.
EXTERNAL PROBE
FLOW TEMPERATURE CORRECTION LAWS.
EXTERNAL TEMPERATURE FUNCTION AND THE POSITION OF
THE USER TEMP. ADJUSTMENT CENTRAL HEATING.
Fig. 11-1
N.B.: if the self-learning function is enabled, the Oset
value could be modied automatically.
- DIMENS (dimension and building inertia), adjustable
from 1 to 20, as per standard set on 10. It establishes the
reaction speed of the system depending on the type of
system present. For example:
Value System type
5 system with little heat inertia
10
system with normal dimensions with
radiators
Position of the central heating
temperature user adjustment