Immergas CAR V2 Wireless - 14. DISABLING THE CHRONO-THERMOSTAT; Using CARV2 as Boiler Control Only; 15. REPLACE THE BATTERIES; Battery Replacement Procedure

35
14. DISABLING
THE CHRONOTHERMOSTAT
If CAR
v2
must be used as a boiler control only (simple remote
control function), proceed as follows:
- deactivate the room probe (para. 12.1):
- exclude the 4 time periods of the “PR RIS” in the “Mon
- Sun” group of days, setting the On and O of all 4 time
periods (on1, o1, on2, o2, on3, o3, on4, o4) to 24.00;
- press the AUTO button to set the automatic mode.
N.B.: for the boiler to work in heating mode, the room
thermostat contacts (40-41) on the boiler board must be
closed.
15. REPLACE THE BATTERIES
When appears xed together with “LOWBAT” on the
display of the CAR
V2
, the CAR
V2
batteries must be replaced.
Proceed as follow to make this replacement:
- Open the door (ref. 1 Fig.1-8), remove the battery
compartment lid (ref. 2 Fig.1-8) and replace the batteries
(ref. 5 Fig. 1-8).