Immergas MINI EOLO 28 3E - Page 43

43
INSTALLER
USER
MAINTENANCE TECHNICIAN
TECHNICAL DATA
Id
Parameter
Parameter Description
Range
(ref. 16 Fig. 33)
Default
G1
Gas type
selection
e setting of this function is used to adjust the boiler in order to function
with the correct type of gas.
To access this regulation, once having entered the programming mode, press
the button (2) for 4 seconds. To exit, press button (2) again 4 seconds.
nG - Methane
lG - LPG
Ci - China
e same as
the type of gas
being used
G2
Ignition
power
0 - 70 %
Set according to
factory
inspection