Immergas Victrix Pro 80 2ErP - Circuit Wiring Diagram

29
3-2
2
1
3
4
5
6
4
5
7
INSTALLERUSER
MAINTENANCE TECHNICIAN
For safety reasons the P.C.B. envisions a fuse
that cannot be restored in series with the electric
power supply of the gas valve.
3.2 230 V CIRCUIT WIRING DIAGRAM.
Key: A2 - P.C.B. A4 - Display board E1 - Ignition electrode E2 - Detection electrode G2 - Igniter M1 - Boiler circulator pump M20 - Fan M30 - ree-way valve (optional) S1 - Main switch X90 - Boiler conguration jumper Y1 - Gas valve
Congure the corresponding parameters when
connecting in “simple cascade”, or when con-
necting in “system side ow probe”, or “D.H.W.
p u m p”.
1 - External reset (optional) 2 - Alarm.
Free contact Max. 230 Vac - 0,8 A Max. cosφ ≥ 0,6
3 - System side pump Potential.
Free contact Max. 230 Vac - 0,8 A Max. cosφ ≥ 0,6
4 - External relay (optional) 5 - Coil 230 Vac - Max. 0.1 A 6 - External pump (Driven by M1 pump) 7 - D.H.W. pump
Colour key: BK - Black BL - Blue BR - Brown G - Green GY - Grey OR - Orange P - Purple PK - Pink R - Red Y - Yellow Y/G - Yellow / Green W - White W/BK - White / Black