Name: Implen P 330
Brand: Implen
Rating: 5 (1 reviews)

To Next Page

To Previous Page

NanoPhotometer

P-Class User Manual

Version 2.1 Page 18 / 70

Results Screen

Step 9 Apply/insert the reference sample. Press Blank Key. This

will be used for all subsequent samples until changed.

Step 10 Apply/insert sample and press Sample . This measures

at the selected wavelengths and displays the results. The

sample and dye concentration, the FOI and the ratio of

A260/A280 and A260/A230 are calculated (corrected by

the background if selected).

Step 11 If the absorbance value of the sample is not in the linear

range a “Warning message” will pop up and “Instruction”

will be displayed in the top left corner of the result screen.

Please refer to 3.2 Software instructions/important

information on page 11 for further information.

Step 12 Repeat for all samples.

Step 13 Press Menu/Options to display available Options which are

described on page 8.

Step 14 Press Escape and confirm with Yes to return to the

Nucleic Acids folder.

To change parameters, print or save methods press the Menu/Options button. The options menu will be opened. For

further explanation please see 2.3 Keypad and display on page 6 (P 300) and 7 (P330 / P360).

Questions and Answers:

Need help?

Do you have a question about the Implen P 330 and is the answer not in the manual?

Implen P 330 Specifications

General