Implen P 330 User Manual

NanoPhotometer
®
P-Class User Manual
Version 2.1 Page 64 / 70
8.7 Trouble shooting
Symptom
Solution
Instrument failing start up calibration.
Check that the correct power supply 18 V, 1.2 A is being used and
ensure that the connector is pushed in fully.
Instrument switching off after calibration.
User may be keeping their finger on the ON/OFF button too long, so
that the instrument receives both signals and switches off after the
calibration
Instrument intermittently switches off during
measurement.
Faulty or loose power input connection. Check voltage output of
power supply.
Thermal paper printer displays random or
endless numbers after paper exchange.
Paper roll was maybe changed when the instrument is still in one of
the programs. User needs to move to the main menu before
exchanging the paper roll. Switch the device Off and disconnect the
power supply, reconnect it after about 5 minutes, Firmware update
(version 2.4.2) recommended.
Thermal paper printer prints a plenty of
paper, normal sound, no error message.
Thermal Printer paper was probably put the wrong way, check
correct position of the printer paper.
Thermal printer automatic roller stops.
Please contact the Implen support team!
Please contact the Implen Support Team (support@implen.de, Phone +49-89-7263718 20) if none of the mentioned
solution helps to solve the problem or if another symptom should occur.
9. ACCESSORIES
Certified Didymiumglassfilter for the control of wavelength and
photometric accuracy for the NanoPhotometer
®
P-3034-F
Thermal Paper Printer module for the NanoPhotometer
®
P-31-P
Replacement Paper Rolls for Thermal Paper Printer (pack of 5)
P-31-Pa
Bluetooth connection module (for P300 only)
P-33-B
SD Memory Card module (for P300 only)
P-34-SD
Dust cover for the NanoPhotometer
®
P-3034-D
Lid 5, 2 mm lid for NanoPhotometer
®
Submicroliter Cell
P-3034-L2
Lid 100, 1 mm lid for NanoPhotometer
®
Submicroliter Cell
P-3034-L1
Lid 50, 0.2 mm lid for NanoPhotometer
®
Submicroliter Cell
P-3034-L02
Lid 100, 0.1 mm lid for NanoPhotometer
®
Submicroliter Cell
P-3034-L01
Lid 250, 0.04 mm lid for NanoPhotometer
®
Submicroliter Cell
P-3034-L004
Gaiter for the NanoPhotometer
®
P330 / P360
S-330360-G

Implen P 330 Specifications

General

Brand	Implen
Model	P 330
Category	Measuring Instruments
Language	English