Implen P 330 User Manual

NanoPhotometer
®
P-Class User Manual
Version 2.1 Page 42 / 70
Results Screen (if using standard mode)
NanoPhotometer
®
P 300
Options (select using key pad numbers)
NanoPhotometer
®
P 330 / P 360
Menu (select using key pad numbers)
Results Screen (if using standard mode)
Step 11 Insert the reference sample. Press Blank key. This will be
used for all subsequent samples until changed.
Step 12 Press Sample to display the Run Standard screen.
Step 13 Run the standard by pressing Run OR Press Cancel
to return to the measure screen.
Step 14 Insert the sample and press Sample . The
concentration of the sample is displayed. Results shown
as ---- indicate the concentration is out of range.
Step 15 Repeat for all samples.
Step 16 Press Menu/Options to display available options which
are described below.
Step 17 Press Escape and confirm with Yes to return to the
Functions folder. Query needs confirmation to avoid
unintended escaping the application.
Options (select using key pad numbers)
1) Return to parameters screen.
2) Print result via selected method.
3) Toggles on/off, displaying a graph of wavescan +/- 20 nm
from selected wavelength.
4) Return to Run Standard screen.
7) Sample number – add a prefix to the sample number and
reset the incrementing number to the desired value.
8) Save method – use the left and right arrows to select a folder
to store in (User Methods 1-9), press the down arrow and enter
name.
9) Open printer settings, possibility to change the printer settings
within the method as described in 7.3 Output Options / Printer
Exit Options by pressing Escape , or wait.
Menu (select using key pad numbers)
1) Return to parameters screen.
2) Transfer the results via selected Output Options.
4) Return to Run Standard screen.
7) Sample number – add a prefix to the sample number and
reset the incrementing number to the desired value.
8) Save method – use the left and right arrows to select a folder
to store in (User Methods 1-9), press the down arrow and enter
name.
9) Open Output Options settings, possibility to change the Output
settings within the method as described in 7.3 Output Options
/ Printer
Exit Menu by pressing Escape , or wait.

Implen P 330 Specifications

General

Brand	Implen
Model	P 330
Category	Measuring Instruments
Language	English