IMT Analytics FlowAnalyser PF-300 PRO - Power Supply and Battery Operation

Specifications
14
4
IMT Analytics AG
Gas standard Temperature Pressure Relative
humidity
API Standard Conditions 15/1013
15
°C (60 °F)
1013.25 mbar
(14.7 psia)
0 %
Cummings Standard 25/991
25
°C (77 °F)
991 mbar
(500 ft altitude)
0 %
20 °C/1013 mbar 20/1013
20
°C (68 °F)
1013.25 mbar
(760 mmHg)
0 %
Normal Temperature and
Pressure
NTPD
20.0
°C (68 °F)
1013.25 mbar
(760mmHg)
0 %
Normal Temperature and
Pressure, Saturated
NTPS
20.0
°C (68 °F)
1013.25 mbar
(760mmHg)
100 %
Ambient Pressure at 25 °C AP25
25.0
°C (77 °F)
Current Ambient
pressure
Current gas
humidity
In this User manual, the unit L/min is based on ambient conditions of
0 °C and 1013 mbar (DIN 1343).
Please refer to Appendix B: Measurement parameters and units.
Here, you will also find the conversion factors for the units of meas-
urement.
Input voltage of the power supply unit: 100 – 240 VAC, 50 – 60 Hz, 2.0 A
Output voltage of the power supply unit: 24 VDC, 2.7 A
PF-300 PRO input voltage: 24 VDC, 2.5 A
Power supply protection class: Class I
Only use the power supply unit and cable provided!
Operating time in battery operation: 16 hours
Operating time in battery operation
with MultiGasAnalyser: 13 hours
Charging the battery
A complete charging process takes 8 h. The service life of the battery is extended if
the battery is charged completely only after a prompt by the device.
Thedevice indicates visually and audiblywhen the battery must be
charged. Please do not store the battery in depleted state.
Caution:depletion can damage the battery beyond repair!
4.3 Power supply
4.4 Battery operation