Inateck BCST-10 - Setting up a BT Connection

2.2 Setting up a BT connection
Specify the PIN Code, if you choose "The Default Value 1", the
passkey for setting up a BT connection is 10010; If you choose "The
Default Value 2", the passkey for setting up a BT connection is
40510.
For security concerns, the user can also specify a unique PIN code.
1. Read the "Enter PIN Code" barcode;
2. Read the setting barcodes of parameters' value in APPENDIX
ONE, if the scanner read the setting barcodes 1, 5, 1, 5, 1, 5 in
order, it means the PIN code is 151515.
Refer to APPENDIX I.
Note: Before the BCST-10 Scanner connects with the other devices,
the user should pre-set the scanner.
For example: The BCST-10 Scanner is trying to connect with a host
computer, the setting operation is according to the following steps:
1. Read the "Enter Setup" barcode;
2. Read the "Enable SPP" barcode;
3. Read the "Default Value 1"(PIN code is 10010);
4. Read the "Exit with Save" barcode.
(*)Default Value 1
10010
Default Value 2
40510
Enter PIN Code
Random PIN Code
Enter Setup
Exit with Save
Exit without Save
25