Inateck BCST-10 - Codabar Settings

52
3.1 Codabar
Decide whether or not to enable Codabar. The BCST-10 Scanner
defaults enable Codabar.
Note: Read the "Disable Codabar" barcode will make the scanner
can not read the Codabar barcode. Thus, if the scanner can not read
the Codabar barcode, please trying to read "Enable Codabar" to
reset.
For example: Enable Codabar.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode;
3. Read the "Exit with Save" barcode.
Enable Codabar
（*）
Disable Codabar
Enter Setup
Exit with Save
Exit without Save