Inateck BCST-10 - EAN-8 Settings

63
3.9 EAN-8
3.9.1 Enable/Disable EAN-8
Decide whether or not to enable EAN-8. The BCST-10 Scanner
defaults enable EAN-8.
3.9.2 Convert to EAN-13
There is two ways for EAN-8 to change, convert to EAN-13, or add
"0" ahead of EAN-8, and the EAN-8 ID is not change.
Decide whether or not to convert to EAN-13, if EAN-8 convert to
EAN-13, it will be read as same as EAN-13. If add a "0" ahead of
EAN-8, and the EAN-8 ID is not change, the output ID is still EAN-8
ID.
Enter Setup
Exit with Save
Exit without Save
（*）Enable EAN-8
Disable EAN-8
（*）Do not Convert
Convert to EAN-13
Add "0" ahead and ID is not change