53
3.1.1 Start/Stop Transmission
Decide whether or not to include the Start/Stop characters in the data
being transmitted.
For example: Do Not Transmit Codabar Start/Stop Characters.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Codabar" barcode; (If Codebar is disabled, it is
need to set);
3. Read the "Do Not Transmit Codabar Start/Stop Characters"
barcode;
4. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Do Not Transmit Codabar Start/Stop Characters
(*) Transmit Codabar Start/Stop Characters
To Next Page
Loading...
