Inateck BCST-10 - Page 54

54
3.2 Code25: Industrial 25
Decide whether or not to enable Industrial 25. The BCST-10
Scanner defaults disable Industrial 25.
Note: Read the "Disable Industrial 25" barcode will make the
scanner can not read the Industrial 25 barcode. Thus, if the scanner
can not read the Industrial 25 barcode, please trying to read "Enable
Industrial 25" to reset.
For example: Enable Industrial 25.
1. Read the "Enter Setup" barcode.
2. Read the "Enable Industrial 25" barcode.
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Enable Industrial25
（*）Disable Industrial 25