Inateck BCST-10 - Page 55

55
3.3 Code25: Interleaved 25
Decide whether or not to enable Interleaved 25. The BCST-10
Scanner defaults disable Interleaved 25.
Note: Read the "Disable Interleaved 25" barcode will make the
scanner can not read the Interleaved 25 barcode. Thus, if the
scanner can not read the Interleaved 25 barcode, please trying to
read "Enable Interleaved 25" to reset.
For example: Enable Interleaved 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Interleaved 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Enable Interleaved 25
（*）Disable Interleaved