Inateck BCST-10 - Page 56

56
3.4 Code25: Matrix 25
Decide whether or not to enable Matrix 25. The BCST-10 Scanner
defaults enable Matrix 25.
Note: Read the "Disable Matrix 25" barcode will make the scanner
can not read the Matrix 25 barcode. Thus, if the scanner can not
read the Matrix 25 barcode, please trying to read "Enable Matrix 25"
to reset.
For example: Enable Matrix 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Matrix 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Enable Matrix 25
（*）
Disable Matrix 25