Inateck BCST-10 - Page 57

57
3.5 Code25: Standard 25
Decide whether or not to enable Standard 25. The BCST-10
Scanner defaults enable Standard 25.
Note: Read the "Disable Standard 25" barcode will make the
scanner can not read the Standard 25 barcode. Thus, if the scanner
can not read the Standard 25 barcode, please trying to read "Enable
Standard 25" to reset.
For Example: Enable Standard 25.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Standard 25" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
Enable Standard 25
（*）
Disable Standard 25