Inateck BCST-10 - Upc-E; Enable;Disable UPC-E; UPC-E Checksum Transmission

68
3.12 UPC-E
3.12.1 Enable/Disable UPC-E
Decide whether or not to enable UPC-E. The BCST-10 Scanner
defaults enable UPC-E.
3.12.2 UPC-E Checksum Transmission
Decide whether or not to include the checksum character in the data
being transmitted.
Enter Setup
Exit with Save
Exit without Save
（*）Enable UPC-E
Disable UPC-E
*Transmit UPC-E Checksum
Do Not Transmit UPC-E Checksum