Note: BCST-10 default mode is HID Mode, if you want to use
SPP mode, just read following barcodes before pairing, other
operations is same as HID mode.
2.4 Connect to PDA via BT
PDA is trying to connect to the BCST-10 Scanner (BT SPP).
1. Press the Power key and turn on the BCST-10 Scanner with
correct BT settings, such as setting up SPP as BT transmit
interface, and BT PIN code specified, etc.
2. Find the BT icon on PDA, and double-click.
31
To Next Page
Loading...
