EasyManuals Logo

Indmar Standard 360 User Manual

Indmar Standard 360
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
B-1
© 2020 Indmar Marine Engines
Appendix – B
ENGINE SPECIFICATIONS
Number of Cylinders 8
Displacement 376 cid (6.2 L)
Bore 4.015" (102 mm)
Stroke 3.74" (95 mm)
Compression Ratio 9.8:1
Compression Pressure Minimum 100 psi (690 kPa)
Idle RPM in Neutral 650 RPM
Operating Range at WOT 5000-5400 RPM
Minimum Oil Pressure at Idle 8 psi (55 kPa)
Oil Filter P/N 501022S (cartridge)
Fuel Pump Pressure 60 psi (414 kPa)
Electrical System 12V DC Negative (-) Ground
Minimum Battery Requirements 800 CCA/1000 MCA/150 AH
Firing Order 1-5-4-8-6-3-7-2
Spark Plug Type (16 Plugs
Required) 400, 440, and
460 models
597037-16
Spark Plug Type (16 Plugs
Required) Supercharged
575 Models
597128-16
Spark Plug Gap 400, 440, and
460 Models
0.044" (1.12 mm)
Spark Plug Gap Supercharged
575 Models
0.031" (0.8 mm)
Thermostat 160°F (71°C)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Indmar Standard 360 and is the answer not in the manual?

Indmar Standard 360 Specifications

General IconGeneral
BrandIndmar
ModelStandard 360
CategoryEngine
LanguageEnglish

Related product manuals