5-5
ENGINE STARTING PROCEDURES
© 2020 Indmar Marine Engines
ENGINE RESTART
1. If your engine is already warm and will not re-start, turn key to
ON position and wait for about 20 seconds.
2. Make sure that your throttle lever is in NEUTRAL.
3. Turn key OFF. Try to start engine again. If it does not start
disengage the shift interlock and advance throttle to about
1/4 while holding key in the START position. When engine
starts, release the key and immediately return throttle to IDLE
position.
NOTICE
Your engine is designed to work with the standard electronics
installed in your boat. If you add electrical components or
accessories, you could change fuel injection controls for your
engine or could exceed the amperage capacity of the wiring and
protection system. Before adding electrical equipment, consult
your Indmar dealer.
To Next Page
Loading...
Need help?
General