EasyManuals Logo

Indmar Standard 360 User Manual

Indmar Standard 360
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
7-30
SECTION SEVEN
accessories. Find the cause of the discharge before
permanent damage is done. These types of failures are not
covered by Indmar’s Limited Warranty.
6. GENERAL LUBRICATION
Starter
Your starter has been sprayed with lubrication internally to extend
its longevity. Corrosion, rust and water intrusion will not be covered
under Indmar’s Limited Warranty.
Shift Cables
Spray exposed transmission shift cable ends with a corrosion
protectant and lubricant. Check boat owner’s manual for
recommendations. Work the cable back and forth, and then spray
to completely lubricate. In highly corrosive locations, a complete
cable lubrication system may be purchased through your Indmar
dealer.
$&&(6625<'5,9(
The serpentine drive belt on your engine drives the coolant
circulation pumps and the alternator. Tension is automatically
applied to the belt by a spring loaded tensioner so there are no
adjustments required. The belt should be checked periodically for
damage or wear. Figures 7.15 and 7.16 show the correct routing of
the belt in the event that it needs to be replaced.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Indmar Standard 360 and is the answer not in the manual?

Indmar Standard 360 Specifications

General IconGeneral
BrandIndmar
ModelStandard 360
CategoryEngine
LanguageEnglish

Related product manuals