3-3
35(˨67$57&+(&.6
© 2020 Indmar Marine Engines
INDM_0029
Figure 3.3 – Engine Oil Cartridge Filter (P/N 501022S)
7. Check transmission fluid level. Check V-Drive fluid level if
equipped.
8. Your engine is equipped with a fresh water cooling system.
Check coolant level in the expansion tank.
9. Check serpentine belt for wear and proper tension.
10. Verify that exhaust hoses are in good condition and clamped
tight.
11.
Ensure that the propeller shaft coupler bolts are tight.
12. Verify engine mounts are tight.
13. Check electrical connections and ensure connectors are tight.
Check wiring for signs of wear and abrasion.
14. Verify throttle/shift control is functional and properly adjusted.
15. Verify steering controls are functional and properly adjusted.
To Next Page
Loading...
Need help?
General