Indutherm MC60V - MC60 V State-Level (Service Info Page 1 + 2)

System
description
sales@romanoff.com | www.romanoff.com
2019-01-08
4–8
4.5.4 MC60V State-Level (Service Info Page 1 + 2)
If you press “Serv.” in system parameter menu, you’ll see software ID, generator no. and
machine no.
Figure 7: Service-Info-Page 1
If you press „Serv.“-button again, you’ll see cooling water flow (sensor 0), generator tem-
perature (IGBT)and actual machine state. The rows ‘Water flow 1’ and ‘Op.’ are not used
in MC60V. The button ‘Serv. (Service) Print’ is without function.
Figure 8: Service-Info-Page 2
With pressing of button ‘Ret.‘ you can return to main menu.
Service Info Page 2
1.3
l/min. Water flow 0
0.0
l/min. Water flow 1
22.0
°C IGBT
4
Automatic state
Op.
---
Ret.
Serv.
Service Info Page 1
Print
801.0117
SW-ID.Build
(Jan 26 2018)
(09:35:22)
DM0777
Generator No.
(SER ETH USB)
M18053
Machine No.
Serv.