Inficon BPG402-SE - Removing and Installing the Electronics Unit

14
tina46e1-b (2017-12) BPG402.om
Remove the protective lid and install the gauge to the vacuum system.
Seal with centering ring
Protective lid
(keep it)
Clamp
• Allen wrench, AF 2.5
 Unscrew the hexagon socket set screw (1) on the side of the electronics
unit (2).
2
1
 Remove the electronics unit without twisting it.
Procedure
3.1.1 Removing and Installing
the Electronics Unit
Required tools / material
Removing the electronics unit