Inficon TPG300 - Connecting the <OUTPUT> Analog Signal; Connecting the Relays of the IF300 P

10 IG9972BEN (2017-09) Plug-In Boards.om
Protection against unintentional separation of the triaxial connector.
Each measurement circuit is equipped with an analog
signal output. Matching connectors are included with
each measurement board.
The relay connector on the rear of the IF300P has the following pin assignment:
IF 300P
1
9
15
8
Pin location
Relay 3
(Switching function 3)
Relay 2
(Switching function 2)
Relay 1
(Switching function 1)
Contacts shown de-energized
Screen
1
2
9
3
11
10
12
5
4
6
14
13
8
15
7
Relay 4
(Switching function 4)
Relay 5
(Error status)
4.4 Connecting the
<OUTPUT>
Analog Signal
4.5 Connecting the Relays
of the IF300P
Pin Assignment