tina96e1-b (2016-12) VGC501_VGC502_VGC503.om 49
Definition of the OFF threshold for the gauge to be deactivated by a gauge
connected to the other measurement channel or by itself.
This parameter is only available if the sensor deactivation parameter is set to
S-OFF CH 1, CH 2, CH 3 (VGC503 only) or S-OFF SELF.
Value
T-OFF I
e.g.: T-OFF 100 I The sensor is switched off when the pres-
sure on the respective channel exceeds the
switch-off threshold.
Value T-OFF must be ≥ T-ON .
OFF threshold VGC502,
VGC503
To Next Page
Loading...
