tina96e1-b (2016-12) VGC501_VGC502_VGC503.om 85
Characteristic curve of the recorder output
Transmit: AOM [,a,b] <CR>[<LF>]
Description
a Measurement channel, a =
0 –> Measurement channel 1
1 –> Measurement channel 2
2 –> Measurement channel 3
b Output characteristic, b =
0 –> Logarithmic LOG
1 –> Logarithmic LOG A
2 –> Logarithmic LOG -6
3 –> Logarithmic LOG -3
4 –> Logarithmic LOG +0
5 –> Logarithmic LOG +3
6 –> Logarithmic LOG C1
7 –> Logarithmic LOG C2
8 –> Logarithmic LOG C3
9 –> Linear LIN -10
10 –> Linear LIN -9
11 –> Linear LIN -8
12 –> Linear LIN -7
13 –> Linear LIN -6
14 –> Linear LIN -5
15 –> Linear LIN -4
16 –> Linear LIN -3
17 –> Linear LIN -2
18 –> Linear LIN -1
19 –> Linear LIN +0
20 –> Linear LIN +1
21 –> Linear LIN +2
22 –> Linear LIN +3
23 –> IM221
24 –> Logarithmic LOG C4
25 –> PM411
26 –> CH x
27 –> PRM10K
28 –> IMR110
29 –> IMR120
30 –> IMR310
31 –> IMR320
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a,b <CR><LF>
Description
a Measurement channel
b Voltage (measurement value)
5.8 General Parameters
AOM - Analog output mode
To Next Page
Loading...
