86 tina96e1-b (2016-12) VGC501_VGC502_VGC503.om
Transmit: BAL [,a] <CR>[<LF>]
Description
a Backlight in percent, a = 0 … 100
100% is full brightness
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: a <CR><LF>
Description
a Backlight
Transmit: BAU [,a] <CR>[<LF>]
Description
a Transmission rate, a =
0 –> 9600 Baud
1 –> 19200 Baud
2 –> 38400 Baud
3 –> 57600 Baud
4 –> 115200 Baud (default)
As soon as the new baud rate has been entered, the report signal is
transmitted at the new transmission rate.
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: x <CR><LF>
Description
a Transmission rate
BAL - Backlight
BAU - Transmission rate (USB)
To Next Page
Loading...
