Inficon VGC501 - Page 55

tina96e1-b (2016-12) VGC501_VGC502_VGC503.om 55
In the dot matrix a bar graph or the measured pressure as a function of time
(p = f
(t)
) may be shown.
During parameter setting the parameter and the parameter value may be displayed
in place of this.
Value
BARGRAPH I
BARGRAPH OFF I  Factory setting.
BARGRAPH FSR I  Bar graph covering full scale range.
BARGRAPH FSR h I  Bar graph covering full scale range, high-
level presentation.
BARGRAPH FSR+SP I  Bar graph covering full scale range and
setpoint threshold.
BARGRAPH DEC I  Bar graph covering a decade according to
current measurement value.
BARGRAPH DEC h I  Bar graph covering a decade according to
current measurement value, high-level pre-
sentation.
BARGRAPH DEC+SP I  Bar graph covering a decade according to
current measurement value and setpoint
threshold.
BARGRAPH f(0.2s)I  p = f
(t)
, autoscaled, 0.2 seconds / pixel
For each measurement every 200 ms a
measurement value is saved in tabular form
and the last 100 measurement values (=100
pixel) are shown autoscaled.
The represented data string corresponds to
a logging duration of 20 seconds.
BARGRAPH f(1s) I  p = f
(t)
, autoscaled, 1 second / pixel
For each measurement every second a
measurement value is saved in tabular form
and the last 100 measurement values (=100
pixel) are shown autoscaled.
The represented data string corresponds to
a logging duration of 100 seconds.
BARGRAPH f(6s) I  p = f
(t)
, autoscaled, 6 seconds / pixel
For each measurement every 6 seconds a
measurement value is saved in tabular form
and the last 100 measurement values (=100
pixel) are shown autoscaled.
The represented data string corresponds to
a logging duration of 10 minutes.
BARGRAPH f(1min)I  p = f
(t)
, autoscaled, 1 minute / pixel
For each measurement every minute a
measurement value is saved in tabular form
and the last 100 measurement values (=100
pixel) are shown autoscaled.
The represented data string corresponds to
a logging duration of 100 minutes.
Value
BACKLIGHT I
e.g. BACKLIGHT 60% I  Factory setting
Adjustable from 0 … 100%
100% = full brightness
Bar graph
Backlight