Inficon VGC501 - Page 57

tina96e1-b (2016-12) VGC501_VGC502_VGC503.om 57
Measurement values in floating point or exponential format. If a measurement
value cannot reasonably be expressed in the floating point format, it is
automatically displayed in the exponential format.
Value
FORMAT I
FORMAT X.X I  Floating point format, if possible
(factory setting)
FORMAT X.XESY I  Exponential format
Display of underrange or overrange.
Value
END VAL I
END VAL UR/OR I  When an underrange or overrange occurs
UR or OR is displayed (factory setting)
END VAL VALUE I  When an underrange or overrange occurs
the respective full scale value is displayed
Measurement value format
Display of measurement
range end value