Component Description
Unshielded RJ-45 plug (to be used at ODU
end)
Quantity depends on the modelODU
Shielded RJ-45 plug (to be used at end) IDU -
1 pcs
RJ-45 plug cap - 1 pcs
Cable gland
Quantity depends on the modelODU
Clamps - 2 pcs
Supplied with R5000-Smn(c) 5-6 GHz,
19 dBi models
Table - Packing List
1.2 Additional Items Required
1.2.1 Parts and Materials
External antenna (only for the connectorized models)ODU
Low-loss cables - cable is recommended (only for the connectorized RF CAB-RF-1M
models)ODU
Antenna pole (if necessary)
Required grounding circuit, including cables and rods (if these are not already in place at
the installation site).
To Next Page
Loading...
Need help?
General
