EasyManuals Logo

InfiNet Wireless R5000 Installation

InfiNet Wireless R5000
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Installation of InfiNet Wireless R5000
Installation of InfiNet Wireless R5000
7
1.3 Precautionary Measures
CAUTION
Before you start the installation, please read this section very carefully.
Antennas are installed on the roof tops or on the building walls. This work must be
accomplished only by personnel having special skills and experience in this area.
Antennas and cables are electric conductors. Incidental electrostatic strikes may
occur during the system installation. This can lead to equipment damage or may
hurt the personnel. While installing or changing the elements of the antenna-feeder
system, one must make sure that open metal parts are temporarily grounded.
Do not install the antenna close to the electric power lines. Antenna and antenna
pole have to be installed in such a way that, during their assembling, disassembling
and repairing, they do not have any contact with power lines.
Basic precautionary measures that must be fulfilled during the installation are as
follows:
Do not stay on the roof top in windy or rainy weather, during thunderstorms
or when the working zone is covered with snow or ice
Do not touch the antennas, antenna poles, cables and lighting arrestors
during thunderstorms
Antenna cable must be grounded at all times.
In case of failure, any manipulation of the equipment is allowed to trained personnel
only.

Other manuals for InfiNet Wireless R5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InfiNet Wireless R5000 and is the answer not in the manual?

InfiNet Wireless R5000 Specifications

General IconGeneral
BrandInfiNet Wireless
ModelR5000
CategoryWireless Router
LanguageEnglish