InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
⚫ Press and hold down the M (5) button to enter the Main Menu.
⚫ Select the Compass Calibration menu option with the Up (6) / Down (4) button.
⚫ Briefly press the M (5) button to enter the Compass Calibration submenu.
⚫ An icon like a triaxial coordinate system appears on the screen.
⚫ Follow the icon prompt to rotate the riflescope along three axes at least 360 degrees each
axis in the 15 seconds.
⚫ After 15s, the calibration is finished and exit to the home screen.
Select general settings
⚫ Press and hold down the M (5) button to enter the Main Menu.
⚫ Select the Settings menu option with the Up (6) / Down (4) button.
⚫ Briefly press the M (5) button to enter the submenu.
⚫ This menu item allows you to configure the following settings.
Date setting
⚫ In the Settings submenu, briefly press the M (5) button to active the
Date submenu. Two triangle icons will appear above and below the
value.
⚫ Date format is displayed as YY.MM.DD format (2020.01.01).
⚫ Select the correct value for the year, month and date with a short
press of the Up (6) / Down (4) button.
To Next Page
Loading...
Need help?
General
