InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Units of measurement selection
⚫ In the Settings submenu, select the Unit menu option with the Up (6) / Down (4) button.
⚫ Enter the Unit submenu with a short press of the M (5) button.
⚫ Select the desired unit between meter and yard with a short press of
the Up (6) / Down (4) button.
⚫ Confirm your selection with a short press of the M (5) button.
⚫ Submenu exit will take place automatically.
Set status bar to show or hide
⚫ In the Settings submenu, select the Status Bar menu option with
the Up (6) / Down (4) button.
⚫ Enter the Status Bar submenu with a short press of the M (5) button.
⚫ Briefly press the Up (6) / Down (4) button to select Hide or Show.
⚫ Confirm your selection with a short press of the M (5) button.
⚫ Submenu exit will take place automatically.
Reset to Factory Settings
⚫ In the Settings submenu, select the Factory Reset menu option with the Up (6) / Down (4) button.
⚫ Enter the Factory Reset submenu with a short press of the M (5) button.
⚫ Briefly press the Up (6) / Down (4) button to select Yes or No.
To Next Page
Loading...
Need help?
General
