InfiRay Outdoor • Geni Series• Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
7 Battery Pack
Geni series are supplied with a rechargeable Li-ion Battery Pack IBP-2
which allows operation for up to 5 hours. Please Remember to charge the
Battery Pack before first use.
Battery Pack Installation
⚫ Turn up the puller (14) on the
battery pack (10), and align the
positioning block (A) of the
battery pack (10) with the groove
(B) of the battery compartment
on the Geni, and push the
battery pack (10) into the battery
slot (13).
⚫ When the battery pack is
completely inserted into the
battery slot, turn the puller (14)
clockwise to lock the battery pack.
⚫ Close the puller (14), and the battery pack is completely installed.
⚫ Geni can only be powered by this battery pack. If other battery packs
are used, it may cause irreparable loss, damage to the device, and can
even possibly cause fire.
Charging with Type-C Port
⚫ Install the battery pack into the battery compartment of the product. For
details, see Battery Pack Installation.
⚫ Connect the Type C end (18) of the data cable to the Type C port (3) of
the product.
⚫ Connect the other end of the data cable to the power adapter (19) that
comes with the product, or connect to another USB power socket with
To Next Page
Loading...
Need help?
General
