InFocus IN1110 - Page 17

16
Lamp won’t turn on, Temperature light is on
USB
computer in
HDMI
video 1
video 2
audio out
audio in
Temperature light
Make sure vents aren’t blocked, turn off the projector and
allow it to cool for one minute
USB
computer in
HDMI
video 1
video 2
audio out
audio in
Lamp turns on
Startup
Screen
USB
computer in
HDMI
video 1
video 2
audio out
audio in
“Replace lamp” message appears at startup,
lamp won’t turn on, Lamp light is turned on
USB
computer in
HDMI
video 1
video 2
audio out
audio in
Lamp light
Lamp must be replaced (see page 32)
USB
computer in
HDMI
video 1
video 2
audio out
audio in
loosen screws
loosen screws
Lamp turns on
Startup
Screen
USB
computer in
HDMI
video 1
video 2
audio out
audio in
Problem Solution Result