EasyManuals Logo

InFocus IN2102 User Manual

InFocus IN2102
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
9
Connecting a computer source
Required computer connections
Connect one end of the provided computer cable to the Computer 1 or
Computer 2 connector on the projector and the other to the VESA connec-
tor on your computer. If you are using a desktop computer, you will need to
disconnect the monitor cable from the computer’s video port first (you can
connect this monitor cable to the Monitor Out connector on the projector,
see below).
Connect the black power cord to the Power connector on the side of the pro-
jector and to your electrical outlet. The Power light on the Status Indicator
Panel (page 14) turns amber.
NOTE: Always use the power cord that shipped with the projector.
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio In Computer connector on
the projector. You may also need an adapter.
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, connect the computer’s
monitor cable to the Monitor Out connector on the projector.
NOTE: The projector must be plugged for this feature to work.
To advance slides in a PowerPoint presentation using an optional remote
control, plug the USB cable into the USB mouse connector on your com
-
puter and the USB connector on the projector.
connect computer cable
connect power cord
connect audio cable
connect monitor cable
connect USB cable

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus IN2102 and is the answer not in the manual?

InFocus IN2102 Specifications

General IconGeneral
Matrix size0.55 \
Projection distance10 m
Vertical scan range50 - 85 Hz
Horizontal scan range31 - 79 kHz
Projection technologyDLP
Contrast ratio (typical)2000:1
Projector native resolutionSVGA (800x600)
Keystone correction, vertical-20 - 20 °
Aspect ratio4:3, 5:4, 16:9
RS-232 ports1
Dimensions (WxDxH)297.2 x 228.6 x 99.1 mm
Power requirements100 - 240, 50 - 60 Hz
Connectivity technologyWired
Lamp power200 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)3000 h
Analog signal format systemNTSC, PAL, SECAM
RMS rated power2 W
Microphone inYes
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in2
Noise level35 dB
CertificationUL, c-UL, FCC-A, CE, GOST, TUV GS, CCC, IRAM, NOM, C-Tick, MIC, eK, PSB
Power consumption (typical)250 W
Operating temperature (T-T)5 - 31.11 °C
Weight and Dimensions IconWeight and Dimensions
Weight3130 g
Package weight5260 g

Related product manuals